Waterproofing Systems

Approx. Rs 2,400 / RollGet Latest Price

Product BrochureProduct Details:

DESCRIPTION SikaShield® P24 MG IN 4 mm is an APP modified bituminous waterproofing membrane with a thickness of 4 mm. It is reinforced with a non-woven polyester fabric and is flexible at -2 °C. The top surface is coated with mineral granules, which allows the permanent exposure to UV radiation. The underside of the product has a burn-off film for easy torch-application.
USES The product is used as a waterproofing membrane for: ▪ Balconies and terraces ▪ Flat or sloping roofs with up to 15 % gradient ▪ Bridge decks under asphalt wearing layer Horizontal reinforced concrete slabs, decks, podiums and protrusions ▪ The product is used as a: Exposed single-layer or as a top sheet in a multi-layer roofing system.

Approx. Rs 1,900 / RollGet Latest Price

Product BrochureProduct Details:

DESCRIPTION
SikaShield® P24 MG IN 4 mm is an APP modified bituminous waterproofing membrane with a thickness of 4 mm. It is reinforced with a non-woven polyester fabric and is flexible at -2 °C. The top surface is coated with mineral granules, which allows the permanent exposure to UV radiation. The underside of the product has a burn-off film for easy torch-application.
USES
The product is used as a waterproofing membrane for:
▪ Balconies and terraces
▪ Flat or sloping roofs with up to 15 % gradient
▪ Bridge decks under asphalt wearing layer Horizontal reinforced concrete slabs, decks, podiums and protrusions
▪ The product is used as a: Exposed single-layer or as a top sheet in a multi-layer roofing system

Approx. Rs 1,400 / KgGet Latest Price

Product BrochureProduct Details:

Sika® Injection-201 IN is a very low viscous, elastic and solvent-free polyurethane injection resin. In contact with water, a uniform, closed and therefore watertight pore structure forms, which is elastic and flexible.
USES Sika® Injection-201 IN may only be used by experienced professionals. It is used for permanent watertight sealing with some flexibility to absorb limited movement, in dry, damp or water-bearing cracks and joints in concrete, brickwork and natural stone ▪ It can be used for the injection of the Sika® Fuko System (non re-injectable!) ▪ It can be injected in water-bearing cracks under hydrostatic pressure, preliminary injection in such cases shall be done with Sika® Injection-101h or cementitious injection system for temporary reduction in water pressur

Approx. Rs 1,850 / RollGet Latest Price

Product BrochureProduct Details:

DescriptionSuperThermoLay® is a five layered system with Atactic Polypropylene (APP) modified non-woven polyester reinforced weighing 160 g / m2 bituminous membrane (2 mm, 3 mm, 4 mm, and 5 mm) for superior waterproofing. This type of membrane shows excellent tensile strength and dimensional stability. The torch side of the membrane is covered with polyethylene film for protection of the membrane. The polymer modification of bitumen with APP results in an excellent resistance to hot and cold temperatures.SuperThermoLay® with cold flexibility up to 2°C is supplied in following variants:• Plain finish with thermo-fusible polyethylene film on both surfaces.• Mineral / natural grey slate finish with thermo-fusible polyethylene film on one surface, and mineral / natural gray slate on the other surface.

Approx. Rs 1,910 / RollGet Latest Price

Product BrochureProduct Details:

DESCRIPTION Sika® SealTape F is an elastic system component which is used in combination with Sika® waterproofing products. It reduces the risk of leaks through potential cracking locations at wall corners, floor-to-wall connections, pipe entries etc.
USES Crack-bridging and waterproofing tape used in combination with Sika®waterproofing products for reducing the risk of leakage at locations at risk to cracking for: ▪ Residential or commercial wet rooms ▪ Cold storage areas, car washes and catering kitchens Swimming pools and water retaining structures in combination with ceramic coverings ▪ ▪ Balconies and terraces ▪ Interior and exterior use.

Approx. Rs 2,535 / BagGet Latest Price

Product BrochureProduct Details:

DESCRIPTION Sika® Intraplast® N-200 is an expanding grout admixture for pressure/injection grouting. By introducing into the concrete mix, wet volume expansion and increased fluidity without segregation are produced.
USES Intraplast® N 200 is used to increase flow and cohesion in cement grouts (addition of sand is possible) and to develop non-shrink property. This product can be used for grouting of : ▪ Pre-stressed cable ducts ▪ Rock and soil anchoring ▪ Bearing plates ▪ Pre-placed aggregates ▪ Tunnel linings

Visit our site : https://jaithramachinery.com/